Kia Rio YB Quiz
Automatic Transmission

Oil Filter

In this manual: Automatic Transmission
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
9steps
~59min
3/5difficulty
1special tools
0204060801004936N·mlb·ft
Tightening torque found on this page
Done 0 of 9

Repair Procedures

Removal

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "Under Hood Compartment").

  2. Remove the ATF drain plug (A), allow the fluid to drain, and then reinstall the drain plug.

    Torque: 39.2 – 49 N·m

  3. Remove the valve body cover (A) using the SST (09215-3C000) after loosening the bolts.

  4. Remove the oil filter (A) after loosening the bolts.

Installation

  1. Install the oil filter (A).

    Tightening torque: 9.8–11.8 N·m

  2. Apply liquid sealant in a 0.10 in. (2.6 mm) bead without gaps as shown in the illustration.

    Recommended: LOCTITE FMD-546 or THREE-BOND TB1281B

  3. Install the valve body cover (A).

    Tightening torque: 9.8–11.8 N·m

  4. Fill the automatic transmission with fluid.

    (Refer to Hydraulic System - "Fluid")

  5. Install the lower cover.

    (Refer to Engine Mechanical System - "Under Hood Compartment").

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.