Body Exterior, Doors, Roof & Vehicle Security
B26fc Key Registration
In this manual: Body Exterior, Doors, Roof & Vehicle Security
9steps
~54min
2/5difficulty
Done 0 of 9
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| B26FC | KEY REGISTRATION (Key registration) |
Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | — | ||
| Threshold | Intelligent Key that does not match the Nissan Murano vehicle is registered | ||
| Diagnosis delay time | — | ||
POSSIBLE CAUSE
Improper registration operation
Intelligent Key
BCM
FAIL-SAFE
—
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Perform initialization of BCM and reregistration of all Intelligent Keys. Refer to Work Procedure.
Select “Self Diagnostic Result” mode of “BCM”.
Check DTC.
Is DTC detected?
YES>>Refer to Diagnosis Procedure.
NO>>Inspection End.
REPLACE INTELLIGENT KEY
CONSULT
Prepare Intelligent Key that matches the Nissan Murano vehicle.
Perform initialization of BCM and registration of Intelligent Key. Refer to Work Procedure.
Select “Self Diagnostic Result” mode of “BCM”.
Check DTC.
Is DTC detected?
YES>>GO TO 2.
NO>>Inspection End.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Perform initialization of BCM and registration of all Intelligent Keys. Refer to Work Procedure.
Inspection End.
Was this page helpful?