Cooling System

GENERAL INFORMATION

Radiator

1. Reserve tank

2. Bracket

3. Cap

4. Bracket

5. Radiator upper hose

6. Gasket

7. Drain plug

8. Rubber mount

9. Oil cooler hose (not on all versions)

10. Radiator

11. Radiator lower hose

12. Fan

13. Fan motor

14. Fan shroud

Water Pump

1. Cooling system water pump

2. Water pump pulley

3. Thermostat housing flange (apply liquid gasket, e.g. Loctite, before assembly)

4. Cylinder block flange (apply liquid gasket, e.g. Loctite, before assembly)

5. Pulley flange

Cooling system capacity 7.1 L Location of bleed and drain plugs on diesel engine: – engine drain plug, front left side, 70 N·m – bleed plug, front left on intake manifold Diesel engine thermostat Note: Opening temperature may vary depending on thermostat type. Opening starts 88° C Fully open 100° C Thermo switch Thermo switch location is in the coolant outlet connected to the lower radiator hose (may vary depending on model) Thermo switch ON temperature 90° C Thermo switch OFF temperature 88° C