Balancer shaft disassembly and assembly

Refer to “engine bottom side disassembly” (page 1d- 49).

Refer to “engine bottom side assembly” .

1. 1
   Remove the balancer shaft. Refer to “engine bottom side disassembly” .
2. 2
   Remove the washers, balancer gear and dampers from the shaft.

   

Assembly is in the reverse order of disassembly. Pay attention to the following points:

• apply molybdenum oil solution to each part.

• Set the dampers and install the balancer shaft to balancer gear.

• fit the stopper of the balancer shaft between the dampers.
• Align the line “a” on the balancer shaft with the punch “b” on the balancer gear.