Throttle cable removal and installation

1. 1
   Remove the air cleaner box. Refer to “air cleaner box removal and installation” .
2. 2
   Remove the right handlebar switch box. Refer to “handlebar removal and installation” in section 6b .
3. 3
   Remove the throttle cables as shown in the cable routing diagram. Refer to “throttle cable routing diagram” .

Install the throttle cables in the reverse order of removal.

Pay attention to the following points:

• install the throttle cables as shown in the cable routing diagram. Refer to “throttle cable routing diagram” .
• Check the throttle cable play and proper operation.

  Refer to “throttle cable play inspection and adjustment” in section 0b .

Check that the throttle grip moves smoothly from full open to full close. If it does not move smoothly, lubricate the throttle cables.

Refer to “throttle cable play inspection and adjustment” in section 0b .