Conrod crank pin bearing removal and installation

Refer to “engine bottom side disassembly” (page 1d- 49).

Refer to “engine bottom side assembly” .

Remove the conrod crank pin bearings (1).

• do not remove the bearings (1) unless absolutely necessary.
• Make a note of where the bearings are removed from so that they can be reinstalled in their original positions.

when removing the bearings, be careful not to scratch the conrods and the bearings.

When installing the bearings into the conrod cap and conrod, be sure to install the tab “a” first, and then press in the other opposite side of the bearing.

inspect and select the conrod crank pin bearing if necessary. Refer to “conrod crank pin bearing inspection and selection” .