Tp reset

When replacing the throttle body assembly or tp sensor with a new one or reinstalling the tp sensor, reset the tp learned value in the following procedures:

keep the throttle valves fully closed while resetting the tp learned value.

1. 1
   Turn the ignition switch on.
2. 2
   Set up the sds tool. (Refer to the sds operation manual for further details.)
3. 3
   Click the “active control”.
4. 4
   Click the “tp learned value reset” (1).

   

5. Click the “reset” button (2) to clear the tp learned value.

Note the leaned value of the tp sensor is set at preset position.

6. Close the sds tool and turn the ignition switch off.