Cylinder head cover related parts inspection

Refer to “engine top side disassembly” .

Refer to “engine top side assembly” .

Refer to “cylinder head cover disassembly and assembly” .

Cylinder head cover

Clean and check the gasket grooves “a” and pair reed valve mating surfaces “b” of the cylinder head cover.

If there is anything unusual, replace the cylinder head cover with a new one.

Cmp sensor Note cmp sensor can be checked without removing it from the cylinder head cover.

Refer to “dtc “c11” (p0340): cmp sensor circuit malfunction” in section 1a (page 1a- 29).

Pair reed valve

Inspect the pair reed valves for carbon deposit. If the carbon deposit is found, replace the reed valve with a new one.