Meters / Gauges / Display

How to Use Troubleshooting

~1min read

PRECAUTION / NOTICE / HINT

HINT:

  • Follow the procedure below to troubleshoot the instrument cluster and gauge system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

NEXT
  1. CHECK BATTERY VOLTAGE

(a) Measure the battery voltage.

Standard voltage:

11 à 14 V

If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.

NEXT
  1. CHECK CAN COMMUNICATION SYSTEM*

(a) Check whether CAN communication system DTCs are output.

Click here

Result:

Result

Proceed to

CAN communication DTCs are not output.

A

CAN communication DTCs are output.

B

B

GO TO CAN COMMUNICATION SYSTEM

A
  1. CHECK DTCs*

(a) Check the DTCs.

Click here

Body Electrical > Combination Meter > Trouble Codes

Result:

Result

Proceed to

No DTCs are output.

A

DTCs are output.

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A
  1. CONFIRM PROBLEM SYMPTOMS

NEXT
  1. SIMULATE SYMPTOMS

NEXT
  1. SYMPTOM TROUBLESHOOTING TABLE

(a) Refer to the Symptom Troubleshooting Table.

Click here

Result:

Result

Proceed to

The malfunction is not listed in the Symptom Troubleshooting Table.

A

The malfunction is listed in the Symptom Troubleshooting Table.

B

B

REFER TO SYMPTOM TROUBLESHOOTING TABLE

A
  1. CIRCUIT INSPECTION

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END