Body
Roof Drip Rail Trim Panels
In this manual: Body
~1min read
PROCEDURE

Roof Drip Rail Trim Panel 1 – outer edge; 2 – retainer; 3 – push-in fastener; 4 – tool; 5 – trim panel
Removal PROCEDURE 1. Pull out the outer edge 1 of the trim panel. 2. Remove the trim panel 5 by prying up the retainers 2 with the special tool 4. The tool 4 can be replaced with a suitably bent piece of thick wire. Installation PROCEDURE 1. Install the trim panel by tapping the push-in fasteners in with the hand. Installation must begin from the lower part of the front pillar.

2. On two-door models there must be a gap of approximately 2 mm between the edge of the trim panel and the door (indicated by the arrow).
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?