Body

Rear Bumper

~1min read
03060901201507052N·mlb·ft
Tightening torque found on this page

PROCEDURE

Крепление кронштейна

Rear bumper bracket mounting 1 – bumper; 2, 3 – bolts

Боковые направляющие

Rear bumper side guides 1 – body; 2 – washer; 3 – guide; 4 – side support; 5 – bumper

Removal PROCEDURE 1. Unscrew bolts 2 and 3 (see illustration Rear bumper bracket mounting) on both sides of the bumper bracket mounting to the floor. 2. Remove the bumper by pulling it out of side guides 3 (see illustration Rear bumper side guides). Installation PROCEDURE 1. Install the bumper by inserting its side supports 4 into side guides 3. 2. Tighten bolts 2 and 3 (see illustration Rear bumper bracket mounting) on both sides to torque 70 N·m.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.