Body
Power Window Regulator
In this manual: Body
~1min read
PROCEDURE

Power Window Regulator 1 – connector; 2, 3 – bolts
Removal PROCEDURE 1. Lower the glass. 2. Remove the door panel trim (refer to subsection 11.16). 3. Remove the protective film 13 (refer to Figure Door Glass). 4. Unscrew the bolts securing the window regulator slider to the glass. 5. Lower the glass by hand. 6. Disconnect the connector 1 with wires. 7. Unscrew the bolts 3 securing the motor. 8. Unscrew the bolts 2 securing the window regulator guide. 9. Remove the window regulator through the opening in the lower part of the door. Installation Install the power window regulator in the reverse order of removal.
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?