Honda Accord Quiz
Four-Cylinder Engines

Oil Pan Removal

In this manual: Four-Cylinder Engines
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

REMOVAL
PROCEDURE

1. Warm up the engine to normal operating temperature, then drain the engine oil and remove the oil filter (see Adjustments and Routine Maintenance Chapter).
2. Disconnect the negative battery cable.

If the vehicle's audio system is equipped with an anti-theft code, make sure you have the correct code to reactivate the audio system before disconnecting the battery!
3. Raise the vehicle and support it on safety stands. Remove the engine undercover.

4. Выверните болты крепления ребра жесткости двигателя.

4. Remove the engine stiffener bolts.

5. Отдайте болты крепления поддона к блоку двигателя.

5. Remove the oil pan-to-engine block bolts.

6. Tap around the perimeter of the oil pan with a soft-faced hammer to break the sealant bond, then separate it from the block. Do NOT attempt to pry the oil pan off the mating surface!

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.