Honda Accord Quiz
Four-Cylinder Engines

Oil Pump Removal

In this manual: Four-Cylinder Engines
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

REMOVAL

PROCEDURE

1. Remove the timing belt and balance shaft drive belt (see Balance Shaft Gears and Drive Belt Removal, Inspection and Installation and Timing Belt and Timing Gears Removal, Inspection and Installation). Remove the front balance shaft gear and the rear balance shaft gear cover assembly. Disconnect the CKP/TDC sensor wiring from the main harness. Remove the four mounting bolts and remove the sensor from the oil pump housing.
2. Remove the oil pan (see Oil Pan Removal and Installation).

3. Отсоедините сборку маслозаборника с сетчатым фильтром и трубкой от моста крышек

3. Disconnect the oil pickup assembly with strainer and tube from the main bearing cap bridge and pump housing.

4. Remove the oil pump mounting bolts and remove the oil pump from the engine.

5. Выверните крепежные винты и снимите с насоса крышку.

5. Remove the oil pump cover screws and remove the cover from the pump.

To avoid stripping the screw heads, it is best to loosen them using an impact screwdriver.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.