Hyundai Accent Quiz
Automatic transmission

Forced Downshift Servo Adjustment

In this manual: Automatic transmission
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Clean all dirt from the forced downshift servo adjusting screw.
2. Loosen the lock nut.
3. Loosen and tighten the adjusting screw twice to a torque of 5 N·m.

4. После затягивания винта регулировки моментом затяжки 5 Н•м ослабьте его на

4. After tightening the adjusting screw to a torque of 5 N·m, loosen it by 3–3 1/3 turns.
5. Tighten the lock nut to the specified torque.
Torque: 15–22 N·m

Before adjusting, apply DC780 sealant to the threads of the forced downshift servo adjusting screw.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.