Hyundai Accent Quiz
Automatic transmission

Replacing the Drive Shaft Oil Seal

In this manual: Automatic transmission
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Disconnect the drive shaft from the transmission.

2. Лезвием плоской отвертки снимите уплотнительное кольцо из гнезда коробки передач.

2. Using the blade of a flat-head screwdriver, remove the oil seal from the transmission housing bore.

Clean the oil seal bore and apply a thin coat of oil to it.

3. Используя оправку 09431–21200, установите новое уплотнительное кольцо в гнездо

3. Using installer 09431–21200, install a new O-ring into the transmission case bore.
4. Lubricate the sealing edge of the new O-ring with oil.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.