Hyundai Genesis DH Quiz
Engine Control System/Fuel System

Injector Driver Box (IDB) Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the ECM, TCM and IDB bracket. (Refer to Engine Control System - "ECM")
  3. Disconnect the TCM (B) from the bracket after loosening the mounting bolt (A).
  4. Disconnect the IDB (B) from the bracket after loosening the mounting bolt (A).

Installation

  1. To install, reverse the removal procedure. IDB Installation Bolt/Nut: 9.8 ~ 11.8 N·m IDB Bracket Mounting Bolt/Nut (on vehicle): 9.8 ~ 11.8 N·m

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.