Kia Stonic Quiz
Engine Mechanical

Intake Manifold

In this manual: Engine Mechanical
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
10steps
~60min
3/5difficulty
010203040506.95N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Components and Components Location

COMPONENTS LOCATION

1. Intake Manifold Gasket
2. Suction Tube
3. Boost Pressure Sensor (BPS)
4. Intake Manifold Support



5. Throttle Body Gasket
6. Vacuum Hose
7. Positive Crankcase Ventilation (PCV) Hose

repair procedures

Installation and Removal

  1. Remove the engine cover.

    (Refer to Engine and Transaxle - "Engine Cover")

  2. Remove the air cleaner assembly.

    (See Intake and Exhaust System - Air Cleaner)

  3. Remove the engine undercover.

    (Refer to Engine and Transaxle - "Under Hood")

  4. Disconnect the intercooler outlet hose (A).

    Tightening torque:

    4,9–6.9 N·m

    (If the cap is closed, tighten until the cap is fully seated.)

  5. Disconnect the electronic throttle control (ETC) unit.

    (Refer to Engine Control / Fuel System - "Electronic Throttle Control (ETC) System")

  6. Disconnect the crankcase ventilation hose (A) and the vacuum hose (B).

  7. Remove the bolt securing the coolant return tube (A).

    Tightening torque: 19.6~26 N·m

8th.

Remove the wire harness connector bracket (A).

  1. Remove the intake manifold support (A).

    Tightening torque: 18.6~24 N·m

  2. Remove the intake manifold (A) with the gasket.

    Tightening torque: 18.6~24 N·m

  3. Installation is the reverse of removal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.