ECU Terminals
ECU TERMINALS
CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
*A |
Main Body ECU (Multiplex Network Body ECU) with 2 connectors |
- |
- |
*1 |
Main body ECU (multiplex network body ECU) |
- |
- |
*a |
2 connectors |
- |
- |
*A |
Main Body ECU (Multiplex Network Body ECU) with 1 connector |
- |
- |
*1 |
Main body ECU (multiplex network body ECU) |
- |
- |
*a |
1 connector |
- |
- |
(a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assy.
Click here![]()
(b) Reconnect the connectors to the instrument panel junction block assy.
(c) Measure the voltage and resistance according to the value(s) in the table below.
HINT:
Measure the values at the wire harness side with the connector disconnected.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
MB-31 (BECU) - Body ground |
- |
Battery power supply |
Always |
11 à 14 V |
MB-32 (IG) - Body ground |
- |
Ignition power supply (IG signal) |
Ignition Switch in OFF position |
Below 1 V |
Ignition Switch in ON position |
11 à 14 V |
|||
MB-30 (ACC) - Body ground |
- |
Ignition power supply (ACC signal) |
Ignition Switch in OFF position |
Below 1 V |
Ignition Switch in ACC position |
11 à 14 V |
|||
MB-11 (GND1) - Body ground |
- |
Ground |
Always |
Below 1 Ω |
F15-6 (FLCY) - Body ground |
R - Body ground |
Front LH door courtesy light switch assembly input voltage |
Front left door closed |
10 kΩ minimum |
Front left door open |
Below 1 Ω |
|||
F15-27 (FRCY) - Body ground |
BR - Body ground |
Front RH door courtesy light switch assembly input voltage |
Front right door closed |
10 kΩ minimum |
Front right door open |
Below 1 Ω |
|||
MB-13 (LCTY) - Body ground |
- |
Rear LH door courtesy light switch assembly input voltage |
Rear LH door closed |
10 kΩ minimum |
Rear LH door open |
Below 1 Ω |
|||
MB-2 (RCTY) - Body ground |
- |
Rear RH door courtesy light switch assembly input voltage |
Rear RH door closed |
10 kΩ minimum |
Rear RH door open |
Below 1 Ω |
|||
MB-4 (BCTY) - Body ground |
- |
Luggage compartment door courtesy light switch input |
Luggage compartment door closed |
10 kΩ minimum |
Luggage compartment door open |
Below 1 Ω |
|||
F15-11 (HCTY) - Body ground |
GR - Body ground |
Engine compartment courtesy light switch input |
Hood open |
10 kΩ minimum |
Hood closed |
Below 1 Ω |
|||
MB-3 (KSW) - Body ground*1 |
- |
Unlock warning switch signal |
No key in ignition key cylinder |
10 kΩ minimum |
Key in ignition key cylinder |
Below 1 Ω |
- *1: without smart key system
(d) Reinstall the main body ECU (multiplex network body ECU) onto the instrument panel junction block assy.
Click here![]()
(e) Measure the voltage and check the pulses according to the value(s) in the table below.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
3D-13 (LSFL) - Body ground |
B - Body ground |
Front LH door unlock detection switch input |
Front LH door unlocked |
Below 1 V |
Front LH door locked |
Pulse generation |
|||
3D-12 (LSFR) - Body ground |
GR - Body ground |
Front RH door unlock detection switch input |
Front RH door unlocked |
Below 1 V |
Front RH door locked |
Pulse generation |
|||
F15-29 (L2) - Body ground |
G - Body ground |
Key-linked driver side door lock input |
Driver door lock cylinder in LOCK position |
Below 1 V |
Driver side door cylinder in OFF position |
Pulse generation |
|||
F15-2 (UL3) - Body ground |
L - Body ground |
Key-linked driver side door unlock input |
Driver door lock cylinder in UNLOCK position |
Below 1 V |
Driver side door cylinder in OFF position |
Pulse generation |
|||
3D-14 (LSR) - Body ground |
LG - Body ground |
Rear LH and rear RH door unlock detection switch input |
Rear LH or rear RH door unlocked |
Below 1 V |
Rear LH or rear RH door locked |
Pulse generation |
|||
3A-20 (SH) - Body ground |
LG - Body ground |
Audible alarm unit |
The buzzer assembly sounds (The anti-theft system is in the alarm sounding state.) |
Pulse generation (Below 1 V ← → 11 to 14 V) |
3F-27 (HORN) - Body ground |
SB - Body ground |
Vehicle horn control |
Vehicle horns sound (The anti-theft system is in the alarm sounding state.) |
Pulse generation (Below 1 V ← → 11 to 14 V) |