Theft Deterrent / Keyless Entry

How to Use Troubleshooting

~1min read

PRECAUTION / NOTICE / HINT

HINT:

  • Follow this procedure to troubleshoot the anti-theft system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

(a) Ask the customer to confirm the problem.

Click here

NEXT
  1. PRELIMINARY CHECKS

(a) Measure the battery voltage.

Standard voltage:

11 à 14 V

If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connectors and terminals for any abnormality, such as loose connections, deformation, etc.

NEXT
  1. SIMULATE SYMPTOMS

NEXT
  1. CHECK CAN COMMUNICATION SYSTEM FUNCTION*

(a) Using the Techstream, check for DTCs related to the CAN communication system.

Click here

Result:

Result

Proceed to

No CAN system DTCs are output

A

CAN-related DTCs are output

B

B

GO TO CAN COMMUNICATION SYSTEM

A
  1. SYMPTOM TROUBLESHOOTING TABLE

(a) Refer to the Symptom Troubleshooting Table.

Click here

Result:

Result

Proceed to

The malfunction is not listed in the Problem Symptoms Table

A

The malfunction is listed in the Problem Symptoms Table

B

B

GO TO STEP 8

A
  1. PERFORM VEHICLE INSPECTION AND TROUBLESHOOTING*

(a) System description

Click here

(b) ECU Terminals

Click here

(c) Data List/Active Test

Click here

(d) Check

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END