Theft Deterrent / Keyless Entry

Operation History

~6min read

OPERATION HISTORY

NOTICE:

  • If the vehicle or vehicle controls are operated (for example, during inspection when the vehicle is brought in for repairs) before the operation history is read and recorded, the operation history information may be lost.
  • The "Read Operation History" function uses the current system time setting in Techstream and the clock in the inspection ECU to calculate the times shown in the operation history. For this reason, before reading the operation history, first make sure the Techstream system clock is set accurately to the current time.
  • Before replacing the main body ECU (multiplex network body ECU), refer to the REGISTRATION section*1.

    Click here

    *1: with Smart Key System

  • The ignition switch is in the OFF position and all doors and the hood are closed, all doors are locked using the remote control or the operation-unlock system*1.

    *1: with Smart Key System

Operation history

HINT:

Operation History: The Main Body ECU (Multiplex Network Body ECU) records the anti-theft system operation history, which can be read using the Techstream.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menus: Body Electrical / Main Body / Utility / Operation History.

(e) Follow the on-screen instructions to record the operation history.

Automatic alarm activated without reason

Tester display

Item Description

Vehicle Condition / Environment

Detection Reason

Remarks

Hood Open

Hood courtesy light switch assembly ON detected.

(Hood open)

Vehicle

Malfunction of hood courtesy light switch system

ON/OFF state change of hood courtesy light switch circuit detected

NOTICE:

Even if the inspection result is normal, if the alarm is frequently triggered by the same "Hood open" operating cause, first make sure the cause is not a partially engaged connector, then replace the hood courtesy light switch assembly.

Environment

Hood vibration occurs due to strong wind, etc. when the hood is partially open

"Hood open" detected due to vibration

Door Open

Door courtesy light switch assembly ON detected.

(one of the doors is open)

Vehicle

Malfunction of door courtesy light switch system

Short to ground detected in courtesy light switch circuit

NOTICE:

Even if the inspection result is normal, if the alarm is frequently triggered by the same "Door open" operating cause, first make sure the cause is not a partially engaged connector, then replace all door courtesy light switch assemblies.

Door Unlock

Door lock position switch ON detected on one of the doors.

(one of the doors is unlocked)

Vehicle

Malfunction of door lock position switch system

Door unlocked using the mechanical key

Short to ground detected in door lock position switch circuit

Door unlock detected

NOTICE:

Even when the inspection result is normal, if the alarm frequently triggers due to the same "Door unlocked" operation cause, first make sure the cause is not a partially engaged connector, then replace all door lock position switches.

IG

without Smart Key System:

  • Key switch (unlock warning switch) in OFF position and IG ON detected.

with Smart Key System:

  • IG OFF → IG ON change detected at least 5 seconds after pressing the engine switch.

Vehicle

Ignition System Malfunction

Short to +B in ignition circuit detected

-

Battery Disconnection

Battery disconnection and reconnection detected.

Vehicle

While the alarm is armed, if for any reason such as battery discharge, etc., "Battery removal or installation" → "Jump Start" using jumper cables has been performed.

System is configured to trigger the alarm (+B circuit) if the battery is disconnected while armed → the alarm is reconnected.

NOTICE:

Even if the inspection results are normal, if the alarm frequently triggers due to the same "Battery" operation cause, replace the main body ECU (multiplex network body ECU).

Momentary Disconnection in +B Circuit

HINT:

Explanation of Operation History Display Items.

Item

Description

Time Information

Time during which the main body ECU (multiplex network body ECU) performed each operation history item.

Ignition ON/OFF Counter

  • The counter increases when the ignition switch is turned from ON to OFF.
  • The initial value is 0 times, the maximum value is 255 times.
  • When the value reaches 255, it returns to 0 at the next increment and counting continues.

Operation Details

Name of the operation history item performed by the main body ECU (multiplex network body ECU).

Elapsed time since CPU reset

Starting from the moment battery supply voltage to the main body ECU (multiplex network body ECU) began, the elapsed time until each operation history item was performed.

Number of CPU resets

  • Number of times battery supply voltage to the main body ECU (multiplex network body ECU) changed from an unpowered* state to a powered state.
  • The initial value is 0 times. The maximum value is 3 times.
  • When the value reaches 3, it returns to 0 at the next increase, and counting continues.

*: Operation history resulting in an unpowered state includes battery removal/installation, main body ECU (multiplex network body ECU) removal/installation, battery voltage drop, etc.