Exterior Lighting

Freeze Frame Data

~2min read

FREEZE FRAME DATA

FREEZE FRAME DATA

(a) Each time an automatic headlight levelling system DTC is stored, the left headlight ECU sub-assembly stores the current vehicle operating conditions as freeze frame data.

INSPECT FREEZE FRAME DATA

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menu items: Body Electrical / HL AutoLeveling / Trouble Codes.

(e) Select the DTC to display its freeze frame data.

Body Electrical > HL AutoLeveling

Tester display

Item

Range

Normal Condition

Diagnostic Note

Headlight Low Beam State

Low beam headlight status

ON or OFF

ON: Low beam headlights on

OFF: Low beam headlights off

-

Headlight High Beam State

High beam headlight status

ON or OFF

ON: High beam headlights on

OFF: High beam headlights off

-

DRL Operating State

DRL Status

ON or OFF

ON: DRL is ON

OFF: DRL is OFF

-

Daylight Operating State

Daytime running light status

ON or OFF

ON: Daytime running lights on

OFF: Daytime running lights off

-

Front Right Wheel Speed Value

Front right wheel speed

0,00 à 328 km/h

The status can be displayed.

-

Front Left Wheel Speed Value

Front left wheel speed

0,00 à 328 km/h

The status can be displayed.

-

Vehicle Acceleration

Vehicle acceleration

-455,64 à 445,60 m/s2

The status can be displayed.

-

Clearance Light State

Clearance light status

ON or OFF

ON: Clearance lights on

OFF: Clearance lights off

-

+B

Left headlight ECU sub-assembly ignition power supply voltage value

0 à 19,75 V

11,00 à 14,00 V

-

+B Voltage Value

Left headlight ECU sub-assembly ignition power supply +B voltage value

0 à 19,75 V

11,00 à 14,00 V

-

Number Of Trouble Codes

Number of DTCs stored when freeze frame data is stored

0 à 255

0 à 255

-

CLEAR FREEZE FRAME DATA

NOTICE:

Clearing DTCs also clears freeze frame data.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Clear the DTCs and freeze frame data.

Click here

Body Electrical > HL AutoLeveling > Clear DTCs