Exterior Lighting

Left headlight ECU variation error (B2456)

~1min read

DESCRIPTION

This DTC is stored when a left headlamp ECU subassembly that is not compatible with the vehicle has been installed.

DTC No.

Detection Item

DTC Detection Condition

Suspected Area

Note

B2456

Left headlight ECU variation error

Incompatible left headlamp ECU subassembly installed

  • Left Headlight ECU Subassembly
  • ECM

-

PRECAUTION / NOTICE / HINT

NOTICE:

If the left headlight ECU subassembly has been replaced, it is necessary to synchronize the vehicle information and reset the left headlight ECU subassembly.

Click here

PROCEDURE

  1. CLEAR DTCs

(a) Clear the DTCs.

Click here

Body Electrical > HL AutoLeveling > Clear DTCs
NEXT
  1. CHECK WHETHER DTCs ARE OUTPUT

(a) Turn the ignition switch to ON.

(b) Check DTCs.

Click here

Body Electrical > HL AutoLeveling > Trouble Codes

OK:

DTC B2456 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG
  1. CHECK ECM

(a) Check whether the reference number of the ECM installed on the vehicle is correct.

OK:

Reference number is correct.

OK

REPLACE LEFT HEADLIGHT ECU SUBASSEMBLY

NG

REPLACE ECM