Exterior Lighting

Vehicle speed sensor malfunction (B2415)

~2min read

DESCRIPTION

The left headlamp ECU subassembly transmits signals indicating the vehicle speed received from the brake actuator assembly (skid control ECU) via the CAN communication system. The left headlamp ECU subassembly stores DTC B2415.

DTC No.

Detection Item

DTC Detection Condition

Suspected Area

Note

B2415

Vehicle speed sensor malfunction

Vehicle speed signal malfunction

  • Left Headlight ECU Subassembly
  • Brake actuator assembly (skid control ECU)

-

WIRING DIAGRAM

PRECAUTION / NOTICE / HINT

NOTICE:

  • Check that there are no malfunctions in the CAN communication system before performing the following check.

    Click here

  • If the left headlight ECU subassembly has been replaced, it is necessary to synchronize the vehicle information and reset the left headlight ECU subassembly.

    Click here

PROCEDURE

  1. CLEAR DTCs

(a) Clear the DTCs.

Click here

Body Electrical > HL AutoLeveling > Clear DTCs
NEXT
  1. CHECK WHETHER DTCs ARE OUTPUT

(a) Turn the ignition switch to ON.

(b) Check DTCs.

Click here

Body Electrical > HL AutoLeveling > Trouble Codes

OK:

DTC B2415 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG
  1. CHECK DTCs (VEHICLE STABILITY CONTROL SYSTEM)

(a) Check the DTCs.

Click here

Chassis > ABS/VSC/TRAC/EPB > Trouble Codes

OK:

DTCs related to the vehicle stability control system are not output.

OK

REPLACE LEFT HEADLIGHT ECU SUBASSEMBLY

NG

GO TO VEHICLE STABILITY CONTROL SYSTEM