Malfunction
DESCRIPTION
If a door window closes by itself when no window closing operation has been performed, the cause may be a vehicle malfunction, environmental factors, or an operation by the customer (including by another passenger in the vehicle). Using the operation history, the possible causes of the malfunction can be narrowed down, allowing the problem to be resolved by repair, replacement or, in some cases, by explaining environment- or usage-related issues.
If a door window opens by itself when no window opening operation has been performed, the cause may be a vehicle malfunction, environmental factors, or an operation by the customer (including by another passenger in the vehicle). Using the operation history, the possible causes of the malfunction can be narrowed down, allowing the problem to be resolved by repair, replacement or, in some cases, by explaining environment- or usage-related issues.
WIRING DIAGRAM
Click here![]()
PRECAUTION / NOTICE / HINT
NOTICE:
- If the vehicle or vehicle controls are operated (for example, during inspection when the vehicle is brought in for repairs) before the operation history is read and recorded, the operation history information may be lost.
- The "Read Operation History" function uses the current system time setting in Techstream and the clock in the inspection ECU to calculate the times shown in the operation history. For this reason, before reading the operation history, first make sure the Techstream system clock is set accurately to the current time.
- Manual operation of the power windows using the various seat switches is not recorded in the power window operation history.
PROCEDURE
CHECK POWER WINDOW OPERATION HISTORY
(a) Use the Techstream to check the door window operation history at the approximate time of the malfunction reported by the customer, based on the customer interview and the most recent window operation history record at the approximate time the problem occurred.
(1) From the Techstream screen, select the following menus: Body Electrical / Main Body / Utility / Operation History Analysis. Based on the Techstream display, record the operation history.
Click here![]()
(2) Confirm that there is a power window operation history as reported by the customer.
Click here![]()
HINT:
Based on the operation history display, perform the vehicle-side inspection and carry out repairs if a problem is found. If the vehicle has no malfunction, ask the customer to describe the probable causes as "driver" or "environment / other than driver".
Result:
Result | Proceed to |
|---|---|
There is no operation history close to the time of the malfunction reported by the customer. |
A |
There is an operation history close to the time of the malfunction reported by the customer, and by following the instructions to check the corresponding components, the malfunction was identified. |
B |
There is an operation history close to the time of the malfunction reported by the customer, but the malfunction could not be identified even by following the instructions to check the corresponding components. |
C |
| B | END (VEHICLE MALFUNCTION) |
| C | GO TO STEP 4 |
|
CHECK DOOR LOCK OPERATION
(a) Check the operation of the power door lock system.
Click here
![]()
OK:
The power door lock system operates normally.
| NG | GO TO DOOR LOCK CONTROL SYSTEM |
|
CHECK REMOTE DOOR LOCK FUNCTIONS
(a) Check the remote door lock control function.
- with Smart Key System:
Click here
.gif)
- without Smart Key System:
Click here
.gif)
OK:
The remote power door lock function operates normally.
Result:
Result | Proceed to |
|---|---|
OK |
A |
NG (with smart key system) |
B |
NG (without smart key system) |
C |
| B | GO TO WIRELESS DOOR LOCK CONTROL SYSTEM |
| C | GO TO WIRELESS DOOR LOCK CONTROL SYSTEM |
|
CUSTOMER INTERVIEW
(a) If the symptom cannot be confirmed or reproduced, after explaining to the customer, also explain the input signal history involving systems such as the multiplex network main switch assembly and the electronic key (electronic key transmitter sub-assembly) at the corresponding date/time in the operation history.
Click here![]()
Result:
Result | Proceed to |
|---|---|
The cause has been identified |
A |
The cause could not be identified |
B |
| A | END |
| B | CHECK FOR INTERMITTENT PROBLEMS |