Incomplete Window Position Initialization (B2313)
DESCRIPTION
Power window motor assemblies are operated by the multiplex network main switch assembly, the power window switch assembly, or the rear power window switch assemblies. The power window motor assembly performs the functions of motor, window regulator and ECU.
When the ECU built into a power window motor assembly determines that the power window motor assembly has not been initialized, DTC B2313 is stored.
D Door MotorDTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B2313 |
Window position initialization incomplete |
|
|
Vehicle Operating Conditions |
||||
|---|---|---|---|---|
Sequence 1 | Sequence 2 | Sequence 3 |
||
Diagnostic Condition |
Ignition Switch in ON position |
○ |
○ |
○ |
Malfunction Status |
Power window motor assembly (for driver side) not initialized |
○ |
- |
- |
The power window motor assembly (for driver door) malfunctions |
- |
○ |
- |
|
Battery disconnected |
- |
- |
○ |
|
Detection Duration |
- |
- |
- |
|
Number of Trips |
1 trip(s) |
1 trip(s) |
1 trip(s) |
|
HINT:
The DTC is output when the conditions for any one of the sequences in the table above are met.
P Door MotorDTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B2313 |
Window position initialization incomplete |
|
|
Vehicle Operating Conditions |
||||
|---|---|---|---|---|
Sequence 1 | Sequence 2 | Sequence 3 |
||
Diagnostic Condition |
Ignition Switch in ON position |
○ |
○ |
○ |
Malfunction Status |
Power window motor assembly (for front passenger side) not initialized |
○ |
- |
- |
The power window motor assembly (for front passenger door) malfunctions |
- |
○ |
- |
|
Battery disconnected |
- |
- |
○ |
|
Detection Duration |
- |
- |
- |
|
Number of Trips |
1 trip(s) |
1 trip(s) |
1 trip(s) |
|
HINT:
The DTC is output when the conditions for any one of the sequences in the table above are met.
RL Door MotorDTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B2313 |
Window position initialization incomplete |
|
|
Vehicle Operating Conditions |
||||
|---|---|---|---|---|
Sequence 1 | Sequence 2 | Sequence 3 |
||
Diagnostic Condition |
Ignition Switch in ON position |
○ |
○ |
○ |
Malfunction Status |
Power window motor assembly (for rear left side) not initialized |
○ |
- |
- |
The power window motor assembly (for rear LH door) malfunctions |
- |
○ |
- |
|
Battery disconnected |
- |
- |
○ |
|
Detection Duration |
- |
- |
- |
|
Number of Trips |
1 trip(s) |
1 trip(s) |
1 trip(s) |
|
HINT:
The DTC is output when the conditions for any one of the sequences in the table above are met.
RR Door MotorDTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B2313 |
Window position initialization incomplete |
|
|
Vehicle Operating Conditions |
||||
|---|---|---|---|---|
Sequence 1 | Sequence 2 | Sequence 3 |
||
Diagnostic Condition |
Ignition Switch in ON position |
○ |
○ |
○ |
Malfunction Status |
Power window motor assembly (for rear right side) not initialized |
○ |
- |
- |
The power window motor assembly (for rear RH door) malfunctions |
- |
○ |
- |
|
Battery disconnected |
- |
- |
○ |
|
Detection Duration |
- |
- |
- |
|
Number of Trips |
1 trip(s) |
1 trip(s) |
1 trip(s) |
|
HINT:
The DTC is output when the conditions for any one of the sequences in the table above are met.
PRECAUTION / NOTICE / HINT
NOTICE:
- DTC B2313 is stored in each power window motor assembly.
- If the battery is disconnected while the ignition switch is in ON position, DTC B2313 is stored.
- If a power window motor assembly has been replaced with a new one, initialize the power window control system.
Click here
.gif)
PROCEDURE
PERFORM INITIALIZATION (APPLICABLE LOCATION)
(a) Turn the ignition switch to ON.
(b) Initialize the power window motor assembly.
Click here![]()
HINT:
Initialize the power window motor assembly whose ECU has stored DTC B2313.
|
CHECK WHETHER DTCs ARE OUTPUT
(a) Turn the ignition switch OFF.
(b) Wait at least 10 seconds, then turn the ignition switch to ON.
(c) Check the DTCs.
Click here![]()
HINT:
Check the DTCs for the power window motor assembly whose ECU has stored DTC B2313.
OK:
DTC B2313 is not output.
Result:
Result | Proceed to |
|---|---|
OK |
A |
NG (driver side power window) |
B |
NG (front passenger door window) |
|
NG (rear LH side power window) |
C |
NG (rear RH side power window) |
| A | END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED) |
| B | REPLACE POWER WINDOW MOTOR ASSEMBLY (FOR DRIVER DOOR OR FRONT PASSENGER DOOR) |
| C | REPLACE POWER WINDOW MOTOR ASSEMBLY (FOR REAR LH DOOR OR REAR RH DOOR) |