Driving

Selecting Constant Speed Cruise Control Mode

~5min read

When constant speed cruise control mode is selected, your vehicle maintains the set speed regardless of the following distance. Select this mode only when distance control mode does not operate properly because the radar sensor is dirty.

Monochrome display

1. With cruise control off, press and hold the "ON-OFF" button for more than 1.5 seconds.

Immediately after you press the "ON-OFF" button, the dynamic radar cruise control indicator light comes on. It then changes to the cruise control indicator light.

To select constant speed cruise control mode, dynamic radar cruise control must be inactive when you operate the control lever.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite

2. Accelerate or decelerate the vehicle to the desired speed (above approximately 50 km/h [30 mph]) using the accelerator pedal, then push the stalk down to set the speed.

The cruise control "SET" indicator light comes on.

The speed at which the vehicle is travelling when you release the stalk becomes the set speed.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite

Color display

1. With dynamic radar cruise control inactive, press the "ON-OFF" button for more than 1.5 seconds.

Immediately after you press the "ON-OFF" button, the dynamic radar cruise control indicator light comes on. It then changes to the cruise control indicator light.

To select constant speed cruise control mode, dynamic radar cruise control must be inactive when you operate the control lever.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite

2. Accelerate or decelerate the vehicle to the desired speed (above approximately 50 km/h [30 mph]) using the accelerator pedal, then push the stalk down to set the speed.

The cruise control "SET" indicator light comes on.

The speed at which the vehicle is travelling when you release the stalk becomes the set speed.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite

■ Conditions for setting the dynamic radar cruise control

  • The shift lever is in D.
  • The vehicle is traveling at more than approximately 50 km/h.

■ Acceleration after setting the vehicle speed
The vehicle can accelerate normally by pressing the accelerator pedal.

After acceleration, the set speed is restored. However, in dynamic radar cruise control mode, the vehicle may decelerate to a speed lower than the set speed in order to maintain the distance from the vehicle ahead.

■ Automatic cancellation of dynamic radar cruise control mode
Dynamic radar cruise control mode is automatically cancelled in the following situations.

  • The actual vehicle speed drops below approximately 40 km/h.
  • The VSC system is operating.
  • The TRC system has been operating for some time.
  • When you turn off the VSC system or TRC system by pressing the VSC OFF switch.
  • The sensor is unable to detect properly because it is obstructed in some way.
  • The pre-collision braking system is active.

If dynamic radar cruise control mode is automatically cancelled for any other reason, the system may be malfunctioning. Contact a Toyota dealer, an authorized Toyota repairer, or any reliable repairer.

■ Automatic cancellation of constant speed control mode

Constant speed control mode is automatically canceled in the following situations:

  • The actual vehicle speed is lower than the set speed by more than approximately 16 km/h.
  • The actual vehicle speed drops below approximately 40 km/h.
  • The VSC system is operating.
  • The TRC system has been operating for some time.
  • When you turn off the VSC system or TRC system by pressing the VSC OFF switch.
  • The pre-collision braking system is active.

If constant speed control mode is automatically cancelled for any other reason, the system may be malfunctioning. Contact a Toyota dealer, an authorized Toyota repairer, or any reliable repairer.

■ Dynamic radar cruise control warning messages and buzzers

The system uses warning messages and buzzers to indicate a malfunction or to alert the driver to the need for increased attention while driving. If a warning message is displayed on the multi-information display, check it and follow its instructions.

■ When the sensor may not detect the vehicle ahead correctly
In the following cases, depending on the conditions, depress the brake pedal if the deceleration by the system is insufficient, or depress the accelerator pedal when you need to accelerate.

The sensor may not be able to detect these types of vehicles correctly, so the approach alert may not activate.

  • Vehicles suddenly cutting in
  • Vehicles travelling at reduced speed
  • Vehicles not travelling in the same lane
  • Narrow vehicles at the rear (empty trailers, etc.)
Toyota CH-R. Utilisation des systèmes d'aide à la conduite
  • Motorcycles travelling in the same lane
  • When water or snow spray thrown up by surrounding vehicles interferes with sensor detection
  • When the front of your vehicle is raised upward (caused by a heavy load in the luggage compartment, etc.)
Toyota CH-R. Utilisation des systèmes d'aide à la conduite
  • The vehicle ahead has an extremely high ground clearance
Toyota CH-R. Utilisation des systèmes d'aide à la conduite

■ Conditions in which dynamic radar cruise control mode may not operate correctly
Under the following conditions, depress the brake pedal (or the accelerator pedal, depending on the situation) as necessary.

The sensor may not be able to detect vehicles ahead of your vehicle correctly, so the system may not operate normally.

  • When the road is winding or the lanes are narrow
Toyota CH-R. Utilisation des systèmes d'aide à la conduite
  • When you are weaving within your lane or your lane position is unstable
Toyota CH-R. Utilisation des systèmes d'aide à la conduite
  • When the vehicle ahead decelerates suddenly