Instalación y extracción del ojal de remolque

Utilice el ojal de remolque para remolcar. Enrosque firmemente el ojal de remolque en la toma roscada detrás de la tapa del lado derecho de los parachoques delantero y trasero.

Instalación del ojal de remolque

Take out the towing eyelet, which is stored in a foam block under the floor in the cargo compartment.

Front: Remove the cover – use the vehicle key or a small screwdriver in the notch to carefully pry off the cover.

• La tapa gira sobre su línea central y puede retirarse.

Rear: Remove the cover by pressing on the mark with a finger while folding out the opposite side/corner.

• La tapa gira sobre su línea central y puede retirarse.

4. Screw the towing eyelet in as far as possible.

   

   Fasten the eyelet securing by, for example, inserting a lug wrench* through it and using this as a lever.

Consideraciones antes de utilizar el ojal de remolque

• In certain conditions, the towing eyelet may be used to pull the vehicle onto a flatbed tow truck. The vehicle's position and ground clearance determines if this is possible.
• If the incline of the tow truck is too steep or if the ground clearance under the vehicle is insufficient, attempting to pull it up using the towing eyelet may result in damage.
• If necessary, lift the vehicle using the tow truck's lifting device instead of using the towing eyelet.

Extracción del ojal de remolque

• Desenrosque el ojal de remolque después de usarlo y colóquelo de nuevo en el compartimento de espuma. Vuelva a colocar la tapa del parachoques.

* Opción/accesorio.