Hyundai Accent Quiz
Electrical Equipment

Starter Magnetic Switch Inspection

In this manual: Electrical Equipment
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Disconnect the wire from terminal M.
2. Using jumper wires, connect the battery terminals to terminals S and M.
3. Turn the ignition switch ON. The pinion gear should move forward. If the pinion does not move out, replace the magnetic switch.

Предупреждение

Perform this check within 10 seconds, otherwise the magnetic switch coil may burn out.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.