Hyundai Accent Quiz
Electrical Equipment

Inspection of Magnetic Switch Plunger Return

In this manual: Electrical Equipment
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Disconnect the wire from terminal M.
2. Using jumper wires, connect the battery terminal to terminal M and the magnetic switch body.

Perform this check within 10 seconds, otherwise the magnetic switch coil may burn out.

3. Шестерня стартера должна выдвинуться вперед. После отсоединения проводов шестерня

3. The starter pinion gear should move forward. After disconnecting the wires, the pinion gear should quickly return to its original position.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.