Hyundai i20 Quiz
Engine/Fuel Control System

Ambient Air Temperature Sensor (ATS) Repair Procedures

In this manual: Engine/Fuel Control System
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
8steps
~48min
2/5difficulty
Done 0 of 8

Inspection

  1. Turn the ignition switch to the OFF position.
  2. Disconnect the ATS connector.
  3. Measure the resistance between ATS terminals 1 and 2 [B1/S1].
  4. Check that the resistance is within specification.
    Temperature [°C (°F)] RESISTANCE (kΩ)
    -40 (-40) 811,1~956,8
    -20 (-4) 255,6~287,7
    0 (32) 91,5~98,8
    20 (68) 36,6~38,0
    30 (86) 23,8~24,7
    40 (104) 15,7~16,6
    50 (122) 10,6~11,3
    60 (140) 7,2~7,9
    80 (176) 3,6~4,0

DEPOSIT

  1. Turn the ignition switch to the OFF position and disconnect the negative (-) battery cable.
  2. Remove the front lower engine compartment cover (A).
  3. Disconnect the ambient air temperature sensor connector (A).
  4. Remove the ambient air temperature sensor (B).

REMEDY

  1. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.