Hyundai i20 Quiz
Engine/Fuel Control System

KNOCK SENSOR (KS) Repair Procedures

In this manual: Engine/Fuel Control System
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
4steps
~24min
2/5difficulty
0102030405023.517N·mlb·ft
Tightening torque found on this page
Done 0 of 4

DEPOSIT

  1. Turn the ignition switch to the OFF position and disconnect the negative (-) battery terminal.
  2. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold")
  3. Remove the feed pipe. (Refer to Fuel System - "Fuel Hose")
  4. Remove the knock sensor (A) after loosening the fixing bolt.

REMEDY

  1. To install, reverse the removal procedure. Knock sensor mounting bolt: 18.6 - 24 N·m

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.