Heated Steering Wheel (if equipped)
In this manual: Heated Steering Wheel (if equipped)
~1min read

When the ignition key is in the ON position, press the steering wheel heater button to heat the steering wheel. The indicator on the button will illuminate. To turn off the steering wheel heater, press the button again.
The indicator on the button will go off.
It will turn off automatically after approximately 30 minutes of steering wheel heating.
If you turn the ignition back on within half an hour after turning off the engine (after the heater button was turned on), the heating system will remain on.
CAUTION- Do not install any holders on the steering wheel.
They will damage the steering wheel heating system.
- Do not use organic solvents such as thinner, benzene, alcohol or gasoline to clean the heated steering wheel. They may damage the steering wheel surface.
- If the steering wheel surface is damaged by a sharp object, it may cause damage to the steering wheel heating system components.
Test yourself
A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?