Preventive Action
Front Radar Sensor (C1A10)
In this manual: Preventive Action
~1min read
DESCRIPTION
C1A10 is output when an internal malfunction of the millimeter wave radar sensor assembly is detected.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
C1A10 |
Front radar sensor |
After the ignition switch is turned ON, the internal malfunction of the millimeter wave radar sensor assembly continues for at least 0.1 seconds. |
Millimeter wave radar sensor assembly |
PRECAUTION / NOTICE / HINT
NOTICE:
- When replacing the millimeter wave radar sensor assembly, always replace it with a new one.
- When the millimeter wave radar sensor assembly is replaced with a new one, the radar sensor beam axis must be adjusted.
Click here
.gif)
PROCEDURE
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Replace the millimeter wave radar sensor assembly.
Click here![]()
(b) Adjust the millimeter wave radar sensor assembly.
Click here![]()
|
CLEAR DTCs (PRE-CRASH SAFETY SYSTEM)
(a) Clear the DTCs.
Click here![]()
| NEXT | END (MILLIMETER WAVE RADAR SENSOR ASSY WAS MALFUNCTIONING) |
Was this page helpful?