Preventive Action

System Description

~15min read

SYSTEM DESCRIPTION

PRE-COLLISION SYSTEM DESCRIPTION

(a) The Pre-Collision System uses the Pre-Collision Alarm Control, Pre-Collision Brake Assist Control and Pre-Collision Brake Control to help avoid a collision or reduce collision damage when it determines that the risk of collision is high or a collision is unavoidable, based on the position and relative speed of the vehicle ahead.

PRE-COLLISION SYSTEM SENSOR DESCRIPTION

(a) The Pre-Collision System sensor receives information on vehicles and pedestrians ahead of the vehicle transmitted from the millimeter wave radar sensor assembly and the forward recognition camera, and determines in advance the risk of collision and the possibility of avoiding it, based on the position and speed of the vehicle.

FUNCTION OF MAIN COMPONENTS

COMPONENTS

FUNCTION

Millimeter Wave Radar Sensor Assembly

  • Emits millimeter wave radar waves forward and uses the reflected waves to detect the distance, direction and relative speed of objects ahead of the vehicle.
  • Determines whether the risk of collision is high or a collision is unavoidable based on signals from each sensor, and sends brake request signals to the VSC ECU.
  • Sends signals to request activation of warning indicators and information for display on the multi-information display in the combination meter assembly, and an audible alarm sounds.

Front Area Recognition Camera

Captures images of the area ahead of the vehicle and processes them to detect preceding vehicles or pedestrians, and sends the information to the millimeter wave radar sensor assembly.

Yaw rate and acceleration sensor (airbag sensor assembly)

Detects the yaw rate and acceleration of the vehicle and sends the signals to the millimeter wave radar sensor assembly.

Steering Angle Sensor (Sensor Subassembly with Clock Spring)

Detects the steering angle and direction and sends the signals to the millimeter wave radar sensor assembly.

Vehicle speed sensor

Detects the wheel rotation speed and sends the signal to the VSC ECU.

Stop light switch assembly

  • Detects brake pedal depression and sends the signals to the VSC ECU.
  • Turns on the stop lights based on the Pre-Collision Brake Control operation signal from the VSC ECU.

Steering pad switch assembly

  • Used to turn the Pre-Collision System ON and OFF.
  • Can be used to change the sensitivity setting of the Pre-Collision System.

VSC OFF Switch (Electric Parking Brake Switch Assembly)

Disables the Pre-Collision Brake Assist Control and Pre-Collision Brake Control when held down.

Skid control ECU (brake actuator assembly)

  • Performs Pre-Collision Brake Control based on brake request signals from the millimeter wave radar sensor assembly.
  • Sends wheel rotation speed signals to the millimeter wave radar sensor assembly.
  • Detects brake request signals and sends a signal to the stop light switch assembly.

Combination meter assembly

  • Displays the Pre-Collision System control status (ON/OFF) and warning timing.
  • If a system malfunction occurs, warns the driver by displaying a message on the multi-information display according to the nature of the problem, illuminating the PCS indicator and sounding the Pre-Collision System buzzer.

Pre-Collision System Urban Buzzer

Sounds to warn the driver that the Pre-Collision Alarm Control is operating.

PRE-COLLISION SYSTEM DESCRIPTION

(a) PRE-COLLISION ALARM:

(1) When the system determines that the possibility of a frontal collision is high, a buzzer sounds and a warning message is displayed on the multi-information display to alert the driver to take evasive action.

(b) PRE-COLLISION BRAKE ASSIST:

(1) When the system determines that the possibility of a frontal collision is high, the system applies greater braking force relative to the brake pedal pressure applied.

(c) PRE-COLLISION BRAKING:

(1) When the system determines that the risk of a frontal collision is high, the system alerts the driver. If the system determines that the possibility of a collision is too high, the brakes are automatically applied to help avoid the collision or reduce the impact speed.

HINT:

  • The vehicle may move after the Pre-Collision Braking function is activated, so the driver must depress the brake pedal appropriately.
  • If the accelerator pedal is pressed firmly or the steering wheel is turned, the system may determine that the driver is taking evasive action and prevent the Pre-Collision Braking function from operating.

PRE-COLLISION SAFETY SYSTEM OPERATION CONTROL

Control Operation

Control

Operating conditions

Transmitting ECU

Receiving ECU

Component operated

Pre-collision warning

Collision possibility is high

Millimeter Wave Radar Sensor Assembly

Combination meter assembly

  • Instrument cluster assembly (warning message)
  • Pre-Collision Safety City buzzer (buzzer)

Pre-Collision Brake Assist

  • Collision possibility is high
  • Brake pedal is depressed

Millimeter Wave Radar Sensor Assembly

  • Combination meter assembly
  • Skid control ECU (brake actuator assembly)
  • Instrument cluster assembly (warning message)
  • Pre-Collision Safety City buzzer (buzzer)
  • Skid control ECU (brake actuator assembly)

Pre-Collision Braking

Collision possibility is high

Millimeter Wave Radar Sensor Assembly

  • Combination meter assembly
  • Skid control ECU (brake actuator assembly)
  • Instrument cluster assembly (warning message)
  • Pre-Collision Safety City buzzer (buzzer)
  • Skid control ECU (brake actuator assembly)

PRE-COLLISION SAFETY SYSTEM OPERATING CONDITIONS

CONTROL OPERATING CONDITIONS FOR EACH FUNCTION

Pre-collision warning

Pre-Collision Brake Assist (PBA)

Pre-Collision Braking (PB)

  • The Pre-Collision Safety System is turned on.
  • Vehicle speed is approximately 10 km/h or more.
  • Relative speed to the vehicle ahead is approximately 10 km/h or more.
  • Relative speed to a pedestrian is approximately 80 km/h or less.
  • The Pre-Collision Safety System is turned on.
  • Vehicle Stability Control is turned on.
  • Vehicle speed is approximately 30 km/h or more.
  • Relative speed to the vehicle ahead is approximately 30 km/h or more.
  • Relative speed to a pedestrian is approximately 80 km/h or less.
  • The Pre-Collision Safety System is turned on.
  • Vehicle Stability Control is turned on.
  • Vehicle speed is approximately 10 km/h or more.
  • Relative speed to the vehicle ahead is approximately 10 km/h or more.
  • Relative speed to a pedestrian is approximately 80 km/h or less.
AVAILABLE CONTROLS FOR EACH FUNCTION (REFERENCE)

Pre-collision warning

Pre-Collision Brake Assist (PBA)

Pre-Collision Braking (PB)

Pedestrian detection function

Available

Available

Available

Available

Conditions under which the system may operate even when there is no risk of collision

(a) In some cases, such as the following, the system may determine that there is a risk of a frontal collision and operate.

  • When crossing a vehicle or pedestrian
  • When changing lanes to pass the vehicle ahead
  • When passing a vehicle ahead that is changing lanes
  • When passing a vehicle ahead that is turning left/right
  • When crossing an oncoming vehicle that is stopped to turn right/left
  • When driving on a road where the position of the vehicle ahead in an adjacent lane may change, such as on winding roads
  • When the vehicle ahead decelerates suddenly
  • If the front of the vehicle is raised or lowered, for example, due to an uneven or undulating road surface
  • When approaching objects at the roadside, such as guardrails, poles, trees or walls
  • When a vehicle, pedestrian or object is at the roadside at the start of a curve
  • When driving on a narrow road surrounded by structures, such as in a tunnel or on a steel bridge
  • When there is a metal object (manhole cover, metal plate, etc.), steps or a protrusion on the road surface or roadside
  • When a pedestrian approaches very close to the vehicle
  • When passing under a low structure over the road (low ceiling, road sign, etc.)
  • When passing under an object (sign, etc.) overhanging a road on an uphill grade
  • When an electric toll gate, parking gate or other gate that opens and closes is closing quickly
  • When using an automatic car wash
  • When driving through or under objects that may come into contact with the vehicle, such as thick grass, tree branches or a banner
  • When the vehicle is splashed with water, snow, dust or other matter from a vehicle ahead
  • When driving through steam or smoke
  • When patterns or paint on the road or on a wall may be mistaken for a vehicle or pedestrian
  • When driving near an object that reflects radio waves, such as a large truck or a guardrail
  • When driving near a television broadcasting station, radio station, power plant or other location with strong radio waves or electrical noise

Situations in which the system may not operate properly

(a) In some cases, such as the following, a vehicle may not be detected by the millimeter wave radar sensor assembly and the front camera recognition sensor, preventing the system from operating properly:

  • When an oncoming vehicle approaches your vehicle
  • When the vehicle ahead is a motorcycle or bicycle
  • When approaching the side of a vehicle
  • When the vehicle ahead has a small rear end, such as an empty trailer
  • When the vehicle ahead has a low rear end, such as a low-bed semi-trailer
  • When the vehicle ahead is carrying a load that extends beyond the rear bumper
  • When the vehicle ahead has very high ground clearance
  • When the vehicle ahead has an irregular shape, such as a tractor or sidecar
  • When sunlight or other light shines directly on the vehicle ahead
  • When a vehicle cuts in front of your vehicle or emerges from beside another vehicle
  • When the vehicle ahead performs an abrupt maneuver (for example, swerves, or suddenly accelerates or decelerates)
  • When you suddenly move in behind the vehicle ahead
  • When the vehicle ahead is not directly in front of your vehicle
  • When driving in difficult weather conditions, such as heavy rain, fog, snow or sandstorms
  • When the vehicle is splashed with water, snow, dust or other matter from a vehicle ahead
  • When driving through steam or smoke
  • When driving in an environment where brightness changes suddenly, such as at the entrance or exit of a tunnel
  • When very bright light, such as sunlight or the headlights of oncoming traffic, shines directly on the front camera recognition sensor
  • When the environment is dark, for example at dusk or dawn, at night or in a tunnel
  • After the engine is started, the vehicle has not been driven for a certain period of time
  • While the vehicle is turning left/right and for a few seconds after turning left/right
  • While driving through a curve and for a few seconds after driving through a curve
  • If your vehicle is slipping
  • If the front of the vehicle is raised or lowered, for example, due to an uneven or undulating road surface
  • If the wheels are misaligned
  • If a windshield wiper blade blocks the front camera of the Pedestrian Detection system
  • The vehicle is unstable
  • The vehicle is traveling at extremely high speeds
  • When driving uphill

(b) In some cases, such as those described below, sufficient braking force may not be obtained, preventing the system from operating properly:

  • If the brake functions cannot operate optimally, for example, when brake components are extremely cold, extremely hot, or wet
  • If the vehicle is not properly maintained (brakes or tires are excessively worn, tire inflation pressure is not appropriate, etc.)
  • When driving on a gravel road or other slippery surfaces

(c) Certain pedestrians, such as those described below, may not be detected by the millimeter-wave radar sensor assembly and the front camera, preventing the system from operating properly:

  • Pedestrians shorter than approximately 100 cm (3.2 ft) or taller than approximately 200 cm (6.5 ft)
  • Pedestrians wearing very loose clothing (a raincoat, a long skirt, etc.), which makes their outline less distinct
  • Pedestrians carrying large luggage, an umbrella, etc., which hides part of their body
  • Pedestrians who are leaning forward or crouching
  • Pedestrians pushing a stroller, wheelchair, bicycle, or any other vehicle
  • Groups of pedestrians standing close to each other
  • Pedestrians wearing white and appearing very bright
  • Pedestrians in darkness, such as at night or in a tunnel
  • Pedestrians wearing clothing of nearly the same color or brightness as their surroundings
  • Pedestrians standing near walls, fences, guardrails, or large objects
  • Pedestrians standing on a metallic object on the road (manhole cover, steel plate, etc.)
  • Pedestrians walking quickly
  • Pedestrians who suddenly change speed
  • Pedestrians who run out from behind a vehicle or a large object
  • Pedestrians who are very close to the side of the vehicle (near the rear view mirror, etc.)

If the PCS indicator light flashes and a warning message is displayed on the multi-information display

HINT:

For details on the PCS indicator light operation and the warning messages displayed, refer to the Diagnostic System.

Click here

(a) The Pre-Collision System may be temporarily unavailable, or a malfunction may have occurred in the system.

(b) Under the following conditions, the reminder light turns off, the message disappears, and the system will become operational again when normal conditions are restored:

  • When the millimeter-wave radar sensor assembly, the front camera, or the area around either sensor is hot, such as in direct sunlight
  • When the millimeter-wave radar sensor assembly, the front camera, or the area around either sensor is cold, such as in an extremely cold environment
  • When the front millimeter-wave radar sensor assembly or the radiator grille emblem is dirty or covered with snow, etc.
  • If the front camera is obstructed, for example, when the hood is open or a sticker is attached to the windshield near the front camera
  • When the millimeter-wave radar sensor assembly performs beam axis alignment correction after detecting a misaligned beam axis.

If the Vehicle Stability Control is turned off

(a) If the Vehicle Stability Control is turned off, the Pre-Collision Brake Assist and Pre-Collision Braking functions are also disabled.

(b) The PCS warning light illuminates and the message "VSC Turned Off Pre-crash Brake System Unavailable" is displayed on the multi-information display.