Customizable Parameters
CUSTOMIZABLE PARAMETERS
NOTICE:
- When the customer requests a change to a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT:
The following PCS functions and the pre-collision system sensitivity setting can be changed from their default values.
CUSTOMIZE PRE-COLLISION SYSTEM
(a) Customizing using the Techstream
(1) Turn the ignition switch OFF.
(2) Connect the Techstream to the DLC3.
(3) Turn the ignition switch to the ON position.
(4) Turn on the Techstream.
(5) Select the following menu items: Customize Setting / Others.
(6) Select the setting by referring to the table below.
OtherTester display | Description | Default setting | Setting | ECU |
|---|---|---|---|---|
PCS Operation State Retention Setting |
Refer to the table below. |
OFF |
0 : OFF, 1 : ON |
Millimeter wave radar sensor assembly |
PCS Alarm Activation Distance Retention Setting 1 |
Refer to the table below. |
OFF |
0 : OFF, 1 : ON |
Millimeter wave radar sensor assembly |
PCS Alarm Activation Distance Retention Setting 2 |
Refer to the table below. |
ON |
0 : OFF, 1 : ON |
Millimeter wave radar sensor assembly |
PCS Alarm Activation Distance Retention Setting 3 |
Refer to the table below. |
OFF |
0 : OFF, 1 : ON |
Millimeter wave radar sensor assembly |
Customizing Settings | Description | Setting |
|---|---|---|
PCS Operating State Retention Setting |
This function retains the ON/OFF setting of the Pre-Collision System when the ignition switch is turned OFF and then ON. |
OFF: Not retained (the Pre-Collision System is always ON) ON: Retained |
PCS Warning Activation Distance Retention Setting 1 |
This function retains the sensitivity setting of the Pre-Collision System when the Pre-Collision System is turned OFF and then ON. |
OFF: Not retained (the setting changes to "Mid") ON: Retained |
PCS Warning Activation Distance Retention Setting 2 |
This function retains the sensitivity setting of the Pre-Collision System when the ignition switch is turned OFF while the Pre-Collision System is ON. |
OFF: Not retained (the setting changes to "Mid") ON: Retained |
PCS Warning Activation Distance Retention Setting 3 |
This function retains the sensitivity setting of the Pre-Collision System when the ignition switch is turned OFF while the Pre-Collision System is OFF. |
OFF: Not retained (the setting changes to "Mid") ON: Retained |