Fail-Safe Table
FAIL-SAFE TABLE
FAIL-SAFE FUNCTION
(a) If a malfunction occurs in the pre-collision safety system, a message is displayed on the multi-information display and the pre-collision safety system is disabled depending on the malfunction.
Warning message | Cause | DTC No. | Return to normal conditions |
|---|---|---|---|
"Pre-Collision System Malfunction Visit Your Dealer" |
Pre-Collision System malfunction |
C1A02 |
The system returns to normal |
C1A10 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
C1A11 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
C1A14 |
The system returns to normal |
||
C1A46 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
C1A47 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
C1A4A |
The system returns to normal |
||
C1A4B |
The system returns to normal |
||
C1A50 |
The system returns to normal |
||
C1A63 |
The system returns to normal |
||
C1A69 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
C1AAE |
The system returns to normal |
||
C1AA0 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
C1AA8 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
C1AA9 |
Once the system has returned to normal, turn the ignition switch OFF and then ON |
||
U0100 |
The system returns to normal |
||
U0125 |
The system returns to normal |
||
U0126 |
The system returns to normal |
||
U0129 |
The system returns to normal |
||
U0235 |
The system returns to normal |
||
U023A |
The system returns to normal |
||
U1002 |
The system returns to normal |
||
"Pre-Collision System Unavailable" |
Millimeter wave radar sensor assembly is not aligned |
Millimeter-wave radar sensor assembly beam axis deviation adjustment and beam axis learning are completed. |
|
"Pre-Collision System Unavailable Clean Sensor" |
A foreign object is attached to the millimeter wave radar sensor assembly |
Millimeter-wave radar sensor assembly is cleaned |
|
"Front Camera Unavailable" |
Temporary malfunction of front recognition camera
|
|
|
The message "Front Camera Vision Blocked. Clean and Demist Windshield" |
A foreign object is attached to the forward recognition camera or to the windshield area in front of the forward recognition camera |
The forward recognition camera or the windshield area in front of the forward recognition camera is cleaned |
|