K114 Continuously Variable Transmission

Definition of Terms

~2min read

TERM DEFINITIONS

Term

Definition

Monitor Description

Description of what the ECM monitors and how it detects malfunctions (purpose and details of the monitoring).

Related DTCs

Group of diagnostic trouble codes output by the ECM based on the same malfunction detection logic.

Enable Conditions

Preconditions that must be met for the ECM to detect malfunctions.

The ECM stores a DTC when all enable conditions are met and the monitored value(s) exceed the malfunction threshold(s).

Sequence of Operation

A priority order is applied to monitoring when multiple sensors and components are used to detect a malfunction.

When a sensor is monitored, the following sensors or components will not be monitored.

Required Sensors / Components

Sensors and components used by the ECM to detect malfunctions.

Monitor Frequency

Frequency at which the ECM checks for possible malfunctions per driving cycle.

"Once per driving cycle" means the ECM checks for malfunctions only once during a driving cycle.

"Continuous" means the ECM checks for possible malfunctions as soon as the enable conditions are met.

Duration

Minimum time during which the ECM must continuously detect a deviation of the monitored value(s) in order to store a DTC. This time starts once the "typical enabling conditions" are met.

Typical Malfunction Thresholds

Value above which the ECM determines that there is a malfunction and stores a DTC.

MIL Operation

Time the malfunction indicator remains on after a malfunction is detected.

"Immediate" means the ECM turns on the malfunction indicator as soon as it determines that there is a malfunction.

"2 driving cycles" means the ECM turns on the malfunction indicator if the same malfunction is detected again during the next driving cycle.

Component Operating Range

Normal operating range of the sensors and solenoid valves under normal driving conditions.

Use these ranges as a reference.

They cannot be used to determine whether a sensor or solenoid valve is faulty or not.