Brake ECU Malfunction (P1750)
DESCRIPTION
HINT:
This DTC P1750 applies only to vehicles for Mexico.
When the ECM receives a malfunction signal from the Skid Control ECU (brake actuator assembly), DTC P1750 is stored.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area | MIL | Memory |
|---|---|---|---|---|---|
P1750 |
Brake ECU Malfunction |
The ECM receives a malfunction signal transmitted from the Skid Control ECU (brake actuator assembly) for 3 seconds (1 trip detection logic). |
Vehicle Stability Control System |
Activated |
DTC recorded |
PRECAUTION / NOTICE / HINT
HINT:
After completing the repair, clear the DTCs and perform the following procedure to confirm that the DTCs are not output.
- Drive the vehicle at 20 km/h or more for at least 9 seconds.
- Check whether any other DTCs are output.
Click here
.gif)
PROCEDURE
CHECK DTC OUTPUT (BRAKE CONTROL SYSTEM)
(a) Check the DTCs of the brake control system.
Click here![]()
Result:
Result | Proceed to |
|---|---|
No DTCs are output |
A |
DTCs are output |
B |
| A | CHECK FOR INTERMITTENT PROBLEMS |
| B | GO TO VEHICLE STABILITY CONTROL SYSTEM |