K114 Continuously Variable Transmission
Check for Intermittent Problems
In this manual: K114 Continuously Variable Transmission
4steps
~24min
2/5difficulty
Done 0 of 4
CHECK FOR INTERMITTENT PROBLEMS
HINT:
Check the ECM using the check mode. Intermittent problems are easier to detect with the Techstream when the ECM is in check mode. In check mode, the ECM uses 1-trip detection logic, which is more sensitive to malfunctions than in normal mode (default mode), which uses 2-trip detection logic.
- Clear the DTCs.
Click here
.gif)
- Switch the ECM from normal mode to check mode using the Techstream.
Click here
.gif)
- Perform a simulation test.
Click here
.gif)
- Check and wiggle the wire harnesses, connectors and terminals.
Click here
.gif)
Was this page helpful?