K114 Continuously Variable Transmission

System Description

~3min read

SYSTEM DESCRIPTION

SYSTEM DESCRIPTION

(a) K114 (CVT) is a continuously variable transaxle with an electronically hydraulically controlled steel belt. It is a highly efficient transaxle controlled together with the engine, which improves fuel efficiency and provides quiet, shock-free shifting. In addition, the continuously variable transaxle includes the following features:

  • Diagnostic Function
  • Fail-Safe Function

FUNCTION OF MAIN COMPONENTS

(a) The main components of the K114 CVT system are as follows:

Component

General Description

Continuously variable transaxle assembly

Shift Solenoid Valve SC

Used to switch control of the Shift Solenoid Valve SLU between the forward and reverse clutch control and the lock-up clutch control.

Shift Solenoid Valve SL

Shift Solenoid Valve SLU

Controls the forward and reverse clutch and the lock-up clutch according to the state of either Shift Solenoid Valve SL or SC.

Shift Solenoid Valve SLP

Controls the oil pressure of the primary pulley.

Shift Solenoid Valve SLS

Controls the oil pressure of the secondary pulley.

Transmission Speed Sensor (NIN)

Detects the primary pulley speed.

Transmission Speed Sensor (NOUT)

Detects the secondary pulley speed.

Transmission Speed Sensor (NT)

Detects the input turbine speed.

CVT Fluid Temperature Sensor

Detects the CVT fluid temperature.

Oil pressure sensor

Detects the CVT oil pressure for belt clamping force.

Stop light switch assembly

Detects the brake pedal state.

Park/Neutral Position Switch

Detects the position of the shift lever.

Shift lock control unit assembly

Transmission Control Switch

  • Detects whether the shift lever is in the M position.
  • Detects the driver's upshift and downshift operations when the shift lever is in the M position.

Combination meter assembly

Shift Position Indicator

Shows the position of the shift lever.

Malfunction Indicator Lamp (MIL)

Turns on or flashes to inform the driver that the ECM has detected a malfunction.

ECM

  • Performs electronic control of the continuously variable transmission system.
  • When the ECM detects a malfunction, it performs diagnosis and stores the faulty area in memory.

Airbag sensor assembly

Yaw rate sensor

Detects the vehicle yaw rate.

Acceleration Sensor

Detects the vehicle's longitudinal and lateral acceleration and deceleration.

Brake Actuator Assembly

Skid control ECU

  • Transmits the vehicle speed and longitudinal acceleration signals to the ECM.
  • Transmits the operating status of the ABS and VSC to the ECM.

DLC3

Used to connect the Techstream to read DTCs and ECM data.

HINT:

The airbag sensor assembly includes the yaw and acceleration sensor.