Exterior Lighting

System Description

~7min read

SYSTEM DESCRIPTION

AUTOMATIC HIGH BEAM SYSTEM

(a) General

The automatic high beam system improves forward lighting for better driver visibility. It operates by detecting light ahead of the vehicle using the forward recognition camera. It automatically turns the headlight high beams on or off.

(b) Function of main components

Component

General Description

Front Area Recognition Camera

Determines when to turn the high beams on or off after identifying the lights of oncoming vehicles, preceding vehicles and other light sources from the camera sensor image information. It then sends high beam request signals to the main body ECU (multiplex network body ECU) via CAN communication.

Airbag ECU assembly (yaw rate sensor)

Sends yaw rate information to the forward recognition camera.

Brake actuator assembly (skid control ECU assembly)

Transmits wheel speed information. This information is used by the forward recognition camera to turn the high beams on and off.

Combination meter assembly

Turns on the automatic high beam indicator and displays a message on the multi-display based on an indicator light request signal from the main body ECU (multiplex network body ECU).

HINT:

  • When a malfunction of the automatic high beam system is detected, the automatic high beam indicator turns off and the warning message "Headlight System Malfunction Visit Your Dealer" is displayed on the multi-display.
  • The automatic high beam indicator comes on to inform the driver that the automatic high beam system is activated.

Main body ECU (multiplex network body ECU)

  • Determines whether the automatic high beam system is in standby mode based on a HIGH signal from the headlight high/low beam switch, a signal from the light control switch in AUTO or HEAD position, and a signal from the automatic high beam switch. It then sends an indicator light request signal and a message display request signal to the combination meter assembly.
  • It receives the high beam request signal from the forward recognition camera and switches the high beams to the low beams.
  • Controls the lighting of the Automatic High Beam system and records diagnostic trouble codes (DTCs) when the system does not operate properly.

Automatic High Beam Switch

Turns the Automatic High Beam system on or off.

ECM

Outputs a signal indicating that the shift lever is in the R position. Based on this signal, the forward recognition camera turns off the high beams.

(c) Basic function

(1) When all of the following conditions are met, the Automatic High Beam system is enabled and the Automatic High Beam indicator light turns on:

  • The ignition switch is in the ON position.
  • The light control switch is in the AUTO or HEAD position and the headlights are on.
  • The high/low beam switch is in the HIGH position.
  • The Automatic High Beam switch is in the ON position.

(2) When all of the following conditions are met, the high beams turn on automatically after a short time:

  • The vehicle speed is above approximately 34 km/h.
  • The area in front of the vehicle is dark.
  • There are no oncoming vehicles with their headlights on.
  • There are no preceding vehicles with their taillights on.
  • There are some street lamps along the road.

(3) When any of the following conditions are met, the high beams turn off automatically after a short time:

  • The vehicle speed is below approximately 27 km/h.
  • There are oncoming vehicles with their headlights on.
  • There are preceding vehicles with their taillights on.
  • The light from street lamps in the vehicle's path exceeds a specified threshold.

(4) When any of the following conditions are met, the Automatic High Beam system is canceled and the indicator light turns off:

  • The ignition switch is turned to the OFF position.
  • The light control switch is set to a position other than AUTO or HEAD.
  • The high/low beam switch is placed in the LOW position.
  • The Automatic High Beam switch is in the OFF position.

HINT:

The high beams can be manually turned on and off using one of the following operations:

  • To switch from high beams controlled by the Automatic High Beam system to low beams manually, move the high/low beam switch to the LOW position. The Automatic High Beam system will be canceled and the headlights will turn on. To reactivate the Automatic High Beam system, move the high/low beam switch to the HIGH position.
  • To switch from headlights controlled by the Automatic High Beam system to high beams manually, set the Automatic High Beam switch to the OFF position. The Automatic High Beam system will be canceled and the high beams will turn on. To reactivate the Automatic High Beam system, set the Automatic High Beam switch to the ON position.

HINT:

The Automatic High Beam system monitors the area in front of the vehicle using the forward recognition camera and decides to turn on the high beams when the surroundings are dark (there are no headlights of oncoming vehicles and no taillights of preceding vehicles). Limitations of the high beam control:

  • When the surrounding area is not dark enough, the high beams remain off even though the automatic light control system turns on the headlights, and the Automatic High Beam indicator light in the instrument cluster turns on. (The brightness level required to automatically turn on the headlights is not the same as the level required to automatically switch the headlights to high beams.)
  • When an oncoming vehicle emerges from a curve or crosses in front of the vehicle, the high beams may remain on.
  • When the fog lights of an oncoming vehicle are detected, the high beams may turn off.
  • The timing for turning the high beams on and off varies depending on the brightness of the headlights or fog lights of oncoming vehicles, or the taillights of preceding vehicles.
  • The timing for turning the high beams on and off may vary depending on whether the weather is normal (fair) or the vehicle is driving on a wet, icy, or snowy road.
  • The timing for turning the high beams on and off varies depending on the number of passengers and the load in the vehicle.
  • Be aware that the high beams may sometimes turn on and off unexpectedly.

HINT:

The forward recognition camera constantly monitors the brightness level of the area in front of the vehicle. There is a delay before the high beams turn on. Even when the surrounding brightness is zero, the high beams do not turn on immediately. The delay varies depending on the situation.