Automatic High Beam System (B124B)
DESCRIPTION
This DTC is stored when the Main Body ECU (Multiplex Network Body ECU) detects malfunctions in the automatic high beam system.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B124B |
Auto High Beam System |
Automatic High Beam System Malfunction |
|
WIRING DIAGRAM
PRECAUTION / NOTICE / HINT
NOTICE:
- Check that there are no malfunctions in the CAN communication system before performing the following check.
Click here
.gif)
- Before replacing the main body ECU (multiplex network body ECU), refer to the registration section.*1
- *1: with Smart Key System
HINT:
If the forward recognition camera stores a DTC related to a malfunction in one of the following, perform the operation below. This DTC will be stored at the same time.- Wheel Speed Sensor Malfunction
- Yaw Rate Sensor Malfunction
- Steering Angle Sensor Malfunction
- CAN Communication Lost
PROCEDURE
CHECK DTC (HEALTH CHECK)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menu items: System Select / Health Check.
(e) Check the DTCs.
Result:
Result | Proceed to |
|---|---|
Only DTC B124B is output |
A |
DTC B124B and other DTCs are output |
B |
| B | GO TO OTHER DTC CHART |
|
CHECK FORWARD RECOGNITION CAMERA SYSTEM
(a) Check whether a warning message for the Dynamic Radar Cruise Control System, Lane Departure Alert System and Pre-Collision Safety System is displayed on the combination meter assembly.
Click here![]()
OK:
No warning message for the Dynamic Radar Cruise Control System, Lane Departure Alert System or Pre-Collision Safety System is displayed.
| OK | REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
| NG | GO TO FORWARD RECOGNITION CAMERA SYSTEM |