Diagnostic System
DIAGNOSTIC SYSTEM
DESCRIPTION
(a) Auto high beam system data and diagnostic trouble codes (DTCs) can be read using the vehicle's Data Link Connector 3 (DLC3). If the system does not appear to operate properly, troubleshoot possible malfunctions using the Techstream and make repairs.
CHECK DLC3
(a) Check DLC3.
Click here![]()
CHECK BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery.
DIAGNOSTIC SYSTEM
(a) If the auto high beam system does not operate properly, the auto high beam indicator light turns off and the warning message "Headlight System Malfunction Visit Your Dealer" is displayed on the multi-information display.
HINT:
In this case, the main body ECU (multiplex network body ECU) stores the DTCs.
Click here![]()