System Description
SYSTEM DESCRIPTION
SYSTEM DESCRIPTION
(a) The tire pressure warning system warns the driver when tire pressure has decreased, in order to reduce CO2 emissions and improve safety.
(b) The tire pressure warning system illuminates the low tire pressure warning light to warn the driver when the following condition is met:
- When the steering wheel switch assembly is operated, the tire pressure decreases to approximately 75% or less of the tire pressure setting at the time of system initialization.
HINT:
The tire pressure warning threshold (the pressure at which the low tire pressure warning light illuminates) cannot be set to approximately 75% or less of the specified tire pressure value.
(c) When the tire pressure warning system detects that the inflation pressure of a tire is below the threshold, it notifies the driver using a warning light.
(d) The tire pressure warning ECU and receiver receive transmitter ID, temperature and tire pressure information from the tire pressure warning valves and transmitters, as shown in the following illustration. This information is used to determine a pressure drop in one of the tires.
*A |
With conventional spare tire |
- |
- |
*1 |
Tire pressure warning ECU and receiver |
*2 |
Tire pressure valve and transmitter |
*3 |
Combination meter assembly - Low tire pressure warning light |
*4 |
Main body ECU (multiplex network body ECU) |
*5 |
Steering pad switch assembly |
- |
- |
*a |
Front |
- |
- |
REGISTRATION DESCRIPTION
(a) When replacing tires and wheels, always make sure to register the transmitter ID correctly.
(b) When replacing one or more tire pressure warning valves and transmitters, or the tire pressure warning ECU and receiver, the transmitter IDs of all tire pressure warning valves and transmitters must be re-registered. Before registering the transmitter ID of a new tire pressure warning valve and transmitter, check the data list and register all transmitter IDs that are already registered.
Click here![]()
LOW TIRE PRESSURE WARNING RESET SWITCH
(a) By operating the steering wheel switch assembly, the tire pressure warning ECU and receiver can be set to warn at an inflation pressure that matches the type of tires fitted to the vehicle. Therefore, the warning threshold must be set to an appropriate value in accordance with local regulations.
(b) After correctly adjusting the inflation pressure of all tires (except the compact spare tire), operate the steering wheel switch assembly and perform initialization.
INITIALIZATION DESCRIPTION
(a) During initialization, the tire pressure warning valves and transmitters measure tire pressure and transmit signals to the tire pressure warning ECU and receiver at a rate of one signal per minute. The initialization process is complete when signals have been received from all tires (except the spare tire).
(b) Perform initialization in the following cases:
(1) Before delivery of a new vehicle.
(2) After replacing the tire pressure warning ECU and receiver*.
(3) After replacing the tire pressure warning valve and transmitter*.
(4) When the specified tire pressure changes due to use of tires of a different size or type.
(5) When the specified tire pressure is changed due to a change in vehicle load, the operating speed range that will be used in the vehicle, etc.
(6) When tires are rotated and the tire pressures differ between the front and rear of the vehicle.
HINT:
*: Perform initialization after transmitter ID registration is complete.
FUNCTION OF MAIN COMPONENTS
Component | Function |
|---|---|
Tire pressure valve and transmitter |
|
Tire pressure warning ECU and receiver |
|
Steering pad switch assembly |
Multi-information display switch. "ENTER" switch:
|
Combination meter assembly |
Sends the vehicle speed signal to the tire pressure warning ECU and receiver. |
Low tire pressure warning light |
|
Main body ECU (multiplex network body ECU) |
|