Tire Pressure Monitoring

Check / Clear DTCs

~3min read
1special tools

CHECK / CLEAR DTCs

CHECK DTCs (TIRE PRESSURE WARNING ECU AND RECEIVER) (using Techstream)

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Chassis / Tire Pressure Monitor / Trouble Codes.

Chassis > Tire Pressure Monitor > Trouble Codes

(f) Read the DTCs.

CHECK DTCs (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Body Electrical / Main Body / Trouble Codes.

Body Electrical > Main Body > Trouble Codes

(f) Read the DTCs.

CHECK DTCs (TIRE PRESSURE WARNING ECU AND RECEIVER) (USING SST CHECK WIRE)

(a) Turn the ignition switch OFF.

*1

DLC3

*2

Low tire pressure warning light

*a

Normal system code

*b

ON

*c

OFF

*d

0,25 s

*e

Codes 13 and 33

*f

0,5 s

*g

2,5 s

*h

1,5 s

*i

4,5 s

*j

Repeat

(b) Using the SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST: 09843-18040

(c) Turn the ignition switch to ON.

(d) Read and record the DTCs indicated by the low tire pressure warning light on the combination meter assembly. Refer to the illustrations for examples of a normal system code and codes 13 and 33.

HINT:

  • If the low tire pressure warning light does not indicate any DTC or normal system code, check the low tire pressure warning light circuit or the TC and CG terminal circuit.

    Suspected Area

    Link

    Tire pressure warning light circuit

    TC and CG terminal circuit

  • If 2 or more malfunctions are indicated simultaneously, the DTC with the lowest numerical value is displayed first.

(e) Refer to the Diagnostic Trouble Code Chart for DTC information.

Click here

(f) After completing the check, turn the ignition switch to OFF and disconnect the SST from the DLC3.

CLEAR DTCs (TIRE PRESSURE WARNING ECU AND RECEIVER)

HINT:

After repairing the malfunctions, clear the DTCs.

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Chassis / Tire Pressure Monitor / Trouble Codes.

Chassis > Tire Pressure Monitor > Clear DTCs

(f) Clear the DTCs by following the instructions displayed on the Techstream screen.

HINT:

Refer to the Techstream operator's manual for more information.

CLEAR DTCs (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))

HINT:

After repairing the malfunctions, clear the DTCs.

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Body Electrical / Main Body / Trouble Codes.

Body Electrical > Main Body > Clear DTCs

(f) Clear the DTCs by following the instructions displayed on the Techstream screen.

HINT:

Refer to the Techstream operator's manual for more information.