Tire Pressure Monitoring
Symptom Table
In this manual: Tire Pressure Monitoring
~1min read
SYMPTOM TROUBLESHOOTING TABLE
HINT:
- Use the table below to determine the cause of the symptoms. If several suspected areas are listed, the possible causes of the symptom are shown in order of probability in the "Suspected Area" column of the table. Check each symptom, verifying the suspected areas in the order listed. Replace parts if necessary.
- Check the fuses and relays associated with this system before checking the suspected areas listed below.
Symptom | Suspected Area | Link |
|---|---|---|
Despite a drop in tire pressure, the tire pressure warning light does not come on |
Initialization |
|
Check the Data List (ID Tire Inflation Pressure) |
||
Check ID code (registration) |
||
Tire pressure warning light stays on (goes off during initial check) |
Tire pressure warning light circuit |
|
Tire pressure warning light stays on (comes on during initial check) |
Operation check |
|
Check the Data List (ID Tire Inflation Pressure) |
||
Tire pressure adjustment |
||
Check ID code (registration) |
||
Initialization |
||
DTCs cannot be checked using the SST check cable |
TC and CG terminal circuit |
|
ECU Power Supply Circuit |
||
Unable to perform initialization |
Tire Pressure Reset Switch |
Was this page helpful?
.gif)