Transmitter ID Not Registered (C2171/71)
DESCRIPTION
The ID codes of each tire pressure valve and transmitter are registered in the tire pressure warning ECU and receiver.
When the ECU detects that a transmitter ID code is not registered in the ECU, this DTC is stored.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area | Note |
|---|---|---|---|---|
C2171/71 |
Transmitter ID Not Registered |
Transmitter ID code is not registered. (When an ID code is not registered for 3 minutes or more) |
Tire pressure warning ECU and receiver |
- |
PRECAUTION / NOTICE / HINT
NOTICE:
- When replacing the tire pressure warning ECU and receiver, record the IDs stored in the ECU using the Techstream and note them down before removal.
Click here
.gif)
- Initialization must be performed
after registering
the transmitter IDs in the tire pressure ECU if the ECU and/or any of the valves and transmitters have been replaced.
PROCEDURE
CHECK REGISTRATION CONDITION (REGISTERED ID CODES)
(a) Turn the ignition switch OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn on the Techstream.
(e) Select the following menu items: Chassis / Tire Pressure Monitor / Data List.
(f) Check the values by referring to the table below.
Chassis > Tire Pressure Monitor > Data ListTester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Registered ID 1 Code |
Registered ID1 Code |
min.: 0 max.: FFFFFFF*1 |
Displays the registered ID number for transmitter ID1 |
- |
Registered ID 2 Code |
Registered ID2 Code |
min.: 0 max.: FFFFFFF*1 |
Displays the registered ID number for transmitter ID2 |
- |
Registered ID 3 Code |
Registered ID3 Code |
min.: 0 max.: FFFFFFF*1 |
Displays the registered ID number for transmitter ID3 |
- |
Registered ID 4 Code |
Registered ID4 Code |
min.: 0 max.: FFFFFFF*1 |
Displays the registered ID number for transmitter ID4 |
- |
Registered ID 5 Code |
Registered ID5 Code |
min.: 0 max.: FFFFFFF*1 |
Displays the registered ID number for transmitter ID5 |
*2 |
HINT:
- *1: Displayed only when the ID number is not registered.
- *2: With conventional spare tire
- The wheel positions of ID1 to ID4 (ID5: With conventional spare tire) cannot be determined on the Data List.
Tester display |
|---|
Registered ID 1 Code |
Registered ID 2 Code |
Registered ID 3 Code |
Registered ID 4 Code |
Registered ID 5 Code |
OK:
The registered transmitter ID codes are displayed on the Techstream.
| OK | REPLACE TIRE PRESSURE ECU AND RECEIVER |
|
PERFORM REGISTRATION (TRANSMITTER ID)
(a) Perform the registration.
Click here![]()
|
PERFORM INITIALIZATION
(a) Adjust the tire pressure to the specified value.
Click here
![]()
(b) Perform initialization.
Click here![]()
|
CONFIRM TIRE PRESSURE (DATA LIST)
(a) Turn the ignition switch OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn on the Techstream.
(e) Select the following menu items: Chassis / Tire Pressure Monitor / Data List.
(f) Check the values by referring to the table below.
Chassis > Tire Pressure Monitor > Data ListTester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
ID 1 Tire Inflation Pressure |
ID 1 Tire Inflation Pressure |
min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 lb/in2), gauge pressure / 0 kPa (0 kgf/cm2, 0 lb/in2) max.: Absolute pressure (abs) / 480 kPa (4.9 kgf/cm2, 70 psi), gauge pressure / 380 kPa (3.9 kgf/cm2, 55 psi) |
Actual Tire Inflation Pressure |
If N/A is displayed, data has not been received.*1 |
ID 2 Tire Inflation Pressure |
Tire Inflation Pressure ID2 |
min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 lb/in2), gauge pressure / 0 kPa (0 kgf/cm2, 0 lb/in2) max.: Absolute pressure (abs) / 480 kPa (4.9 kgf/cm2, 70 psi), gauge pressure / 380 kPa (3.9 kgf/cm2, 55 psi) |
Actual Tire Inflation Pressure |
If N/A is displayed, data has not been received.*1 |
ID 3 Tire Inflation Pressure |
Tire Inflation Pressure ID3 |
min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 lb/in2), gauge pressure / 0 kPa (0 kgf/cm2, 0 lb/in2) max.: Absolute pressure (abs) / 480 kPa (4.9 kgf/cm2, 70 psi), gauge pressure / 380 kPa (3.9 kgf/cm2, 55 psi) |
Actual Tire Inflation Pressure |
If N/A is displayed, data has not been received.*1 |
ID 4 Tire Inflation Pressure |
Tire Inflation Pressure ID4 |
min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 lb/in2), gauge pressure / 0 kPa (0 kgf/cm2, 0 lb/in2) max.: Absolute pressure (abs) / 480 kPa (4.9 kgf/cm2, 70 psi), gauge pressure / 380 kPa (3.9 kgf/cm2, 55 psi) |
Actual Tire Inflation Pressure |
If N/A is displayed, data has not been received.*1 |
ID 5 Tire Inflation Pressure |
Tire Inflation Pressure ID5 |
min.: Absolute pressure (abs) / 0 kPa (0 kgf/cm2, 0 lb/in2), gauge pressure / 0 kPa (0 kgf/cm2, 0 lb/in2) max.: Absolute pressure (abs) / 480 kPa (4.9 kgf/cm2, 70 psi), gauge pressure / 380 kPa (3.9 kgf/cm2, 55 psi) |
Actual Tire Inflation Pressure |
|
HINT:
- *1: It may take a few minutes for the values to be displayed.
- The wheel positions of ID1 to ID4 (ID5: With conventional spare tire) cannot be determined on the Data List.
- If an "ID Tire Inflation Pressure" value has not changed, adjust the tire pressure to the appropriate specified value and rotate the tire 90 to 270 degrees. Then quickly reduce the tire pressure and check the value again.
- *2: With conventional spare tire
Tester display |
|---|
ID 1 Tire Inflation Pressure |
ID 2 Tire Inflation Pressure |
ID 3 Tire Inflation Pressure |
ID 4 Tire Inflation Pressure |
ID 5 Tire Inflation Pressure |
Result:
Result | Proceed to |
|---|---|
All recorded tire pressure values are equal to the specified values. |
A |
Tire pressure values are not displayed. |
B |
| A | END |
| B | REPLACE TIRE PRESSURE ECU AND RECEIVER |