Heater / Air Conditioning
Initialization
In this manual: Heater / Air Conditioning
~1min read
INITIALIZATION
SERVO MOTOR INITIALIZATION
(a) Turn the ignition switch OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Press the A/C OFF switch.
(e) Turn on the Techstream.
(f) Select the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.
(g) Following the Techstream display, initialize the servo motor.
Body Electrical > Air Conditioner > UtilityServomotor Initialization
HINT:
During initialization, the AUTO indicator comes on, then turns off when initialization is complete.
(h) Following the Techstream display, select the Exit switch to complete initialization.
Was this page helpful?