Power Steering Assist Systems

Fail-Safe Table

~2min read

FAIL-SAFE TABLE

If a problem occurs in the power steering system, steering assist stops or the steering assist amount is reduced to protect the system.

Power steering system

Malfunction

Fail-safe operation

EPS warning light

Horn

  • Torque sensor malfunction (electric power steering column sub-assembly)
  • Power steering motor malfunction (EPS ECU assembly)
  • EPS ECU assembly malfunction

Steering assist stops or is limited

Red or yellow

Sounds intermittently or once

  • Vehicle speed signal malfunction
  • Skid Control ECU malfunction (brake actuator assembly)
  • EPS ECU assembly overheating
  • Battery voltage drop (not a malfunction)

Steering assist is temporarily limited

Yellow

Sounds once

HINT:

  • If steering assist stops, the EPS warning light comes on (red).
  • If the steering assist amount is reduced, the EPS warning light (yellow) comes on and vibration or noise may occur.
  • The assist amount may decrease to prevent the motor and ECUs from overheating if the steering wheel is continuously operated while the vehicle is stationary or driven at low speed, or if the steering wheel is held at full lock for a long time. In this case, the steering assist force returns to normal when, with the engine running, the steering wheel is not turned for about 10 minutes.
  • When the battery is not sufficiently charged or the voltage temporarily drops, the amount of steering assist may be reduced and the EPS warning light may come on. In this case, the steering assist force returns to normal when the battery voltage is restored.